In accordance with §11 PAngV (German ordinance regulating the indication of Prices), the last offer price shows the lowest price of the last 30 days after all usual direct discount deductions. Discounts such as cashback or trade-in, which are calculated or paid out after the purchase or by third parties without a contractual relationship with Hifi Foto Koch GmbH (service providers, agencies, manufacturers, etc.) or which require further action, are not included.
Ultra-compact complete system for all content creators on the go alone.
Other product features:
Ultra-compact, easy to use
Toll- and registration-free 2.4 GHz band
Analog 3.5 mm TRS output for cameras, switchable level adjustment
Digital USB-C output for Mac/PC, smartphone*, iPhone*
Clip-on transmitter TX with integrated microphone (ball capsule)
3.5 mm TRS jack for external microphone
40 hours of onboard recording possible in transmitter module
Range: 200 m (free line of sight)
2-channel receiver RX for clip-on or flash shoe mounting
Safety channel mode (-20 dB) can be activated
Power supply: internal LiPo battery (TX and RX)
Battery capacity: up to 7 hours, charging via USB-C jack
Compatible with RØDE Connect and RØDE Central (free software/app)
*For Android and iOS devices optional cable required
Ultra-compact complete system for all content creators who travel alone.
The Wireless GO II SINGLE consists of a transmitter module and a receiver module. The transmitter module already has a microphone optimally tuned for voice transmission. The receiver module has an analog 3.5 mm TRS output for cameras and a digital USB-C output for Mac/PC, smartphone and iPhone.
Operation is very simple.
For operation, you only have to switch on the two modules, they connect automatically. Signal quality is at its finest in both analog and digital: crystal clear and ready to transmit immediately. The transmitter and receiver have an internal battery that lasts for at least four hours. The Wireless GO II system has a range of 200 (!) meters with a clear line of sight. The scope of delivery includes a short 3.5 mm TRS cable, 2 fur windshields, two USB-C to USB-A cables and a neoprene carrying bag.
The TX transmitter module
The 4x4 cm small transmitter module has a clip on the back, with which it can be conveniently attached to clothing - preferably to the collar or lapel. In case the module is too conspicuous in the picture, you can use the 3.5 mm TRS jack on the side and connect an external microphone there, for example the Lavalier GO. If you want, you can also record the audio signal directly in the transmitter module itself as a backup. For this onboard recording function, the module has a memory chip that is sufficient for over 40 hours of audio. For undisturbed outdoor recordings, you should always use the included fur windshield. It can be easily attached to the transmitter module with its bayonet mount.
The receiver module RX
The receiver module can be easily attached to the hot shoe of the camera. The module is then connected to the camera's microphone input via the supplied TRS cable. Using a suitable USB cable, you can also output the signal digitally to a computer or an Android or iOS device. For the latter, the RØDE SC15 or SC16 cables are suitable. The two buttons on the front can be used to select the output mode, mute the transmitter module, and reduce the output level by a flat 12 dB or 24 dB. The LC display shows the output mode, level and charge status of the receiver and transmitter. If necessary, you can also activate the safety mode in the receiver module, whereby the signal is output both at full level (TRS peak) and reduced by 20 dB (TRS ring). If an unexpectedly loud sound source causes audible distortion on the main track, you can simply switch to a quieter, undistorted safety track during post-processing.
Compatible with RØDE Central and RØDE Connect
Free RØDE Central software can be used to perform firmware updates, feature enhancements and special settings on the Wireless GO II SINGLE. RØDE Connect is an amazing and very easy to use podcast/streaming software and also free.
Technical Specifications:
RADIO TRANSMISSION
Transmission: 2.4 GHz band
Range: up to 200 m (free line of sight)
SENDER
Internal microphone: miniature condenser capsule
Polar pattern: Omnidirectional
Limiting sound pressure level: 100 dB SPL (1 kHz @ 1 m)
Self-noise: 22 dBA
Frequency response internal microphone: 50 Hz - 20 KHz
External microphone input: 3.5 mm TRS (mono)
Max. Input level (3.5 mm jack): -20 dBV
Pre-amplification for external microphone: +20 dB
Power supply: built-in LiPo battery (up to 7 hours)
Charging: via USB-C jack
Dimensions (WxDxH): 45.3x44x18.3 mm
Weight: 30 g
RECEIVER
Level switch (pre-attenuation): 0 dB, -12 dB, -24 dB
Analog output: 3.5 mm TRS jack (two-channel)
Digital output: USB-C
System requirements Computer: Windows 10 or later or. Mac OS 10.11 or later
Power supply: LiPo battery (up to 7 hours) or USB
Charging: via USB-C jack
Dimensions (WxDxH): 45.5x44x18.3 mm
Weight: 32 g
Included in delivery:
1x Dual-channel Receiver
1x Transmitter
2x Fur windshield and
2x SC20 (USB-C cable)
1x SC5 (3.5mm TRS cable)
1x Neoprene carrying case
Ultra-compact complete system for all content creators on the go alone.
Other product features:
Ultra-compact, easy to use
Toll- and registration-free 2.4 GHz band
Analog 3.5 mm TRS output for cameras, switchable level adjustment
Digital USB-C output for Mac/PC, smartphone*, iPhone*
Clip-on transmitter TX with integrated microphone (ball capsule)
3.5 mm TRS jack for external microphone
40 hours of onboard recording possible in transmitter module
Range: 200 m (free line of sight)
2-channel receiver RX for clip-on or flash shoe mounting
Safety channel mode (-20 dB) can be activated
Power supply: internal LiPo battery (TX and RX)
Battery capacity: up to 7 hours, charging via USB-C jack
Compatible with RØDE Connect and RØDE Central (free software/app)
*For Android and iOS devices optional cable required
Ultra-compact complete system for all content creators who travel alone.
The Wireless GO II SINGLE consists of a transmitter module and a receiver module. The transmitter module already has a microphone optimally tuned for voice transmission. The receiver module has an analog 3.5 mm TRS output for cameras and a digital USB-C output for Mac/PC, smartphone and iPhone.
Operation is very simple.
For operation, you only have to switch on the two modules, they connect automatically. Signal quality is at its finest in both analog and digital: crystal clear and ready to transmit immediately. The transmitter and receiver have an internal battery that lasts for at least four hours. The Wireless GO II system has a range of 200 (!) meters with a clear line of sight. The scope of delivery includes a short 3.5 mm TRS cable, 2 fur windshields, two USB-C to USB-A cables and a neoprene carrying bag.
The TX transmitter module
The 4x4 cm small transmitter module has a clip on the back, with which it can be conveniently attached to clothing - preferably to the collar or lapel. In case the module is too conspicuous in the picture, you can use the 3.5 mm TRS jack on the side and connect an external microphone there, for example the Lavalier GO. If you want, you can also record the audio signal directly in the transmitter module itself as a backup. For this onboard recording function, the module has a memory chip that is sufficient for over 40 hours of audio. For undisturbed outdoor recordings, you should always use the included fur windshield. It can be easily attached to the transmitter module with its bayonet mount.
The receiver module RX
The receiver module can be easily attached to the hot shoe of the camera. The module is then connected to the camera's microphone input via the supplied TRS cable. Using a suitable USB cable, you can also output the signal digitally to a computer or an Android or iOS device. For the latter, the RØDE SC15 or SC16 cables are suitable. The two buttons on the front can be used to select the output mode, mute the transmitter module, and reduce the output level by a flat 12 dB or 24 dB. The LC display shows the output mode, level and charge status of the receiver and transmitter. If necessary, you can also activate the safety mode in the receiver module, whereby the signal is output both at full level (TRS peak) and reduced by 20 dB (TRS ring). If an unexpectedly loud sound source causes audible distortion on the main track, you can simply switch to a quieter, undistorted safety track during post-processing.
Compatible with RØDE Central and RØDE Connect
Free RØDE Central software can be used to perform firmware updates, feature enhancements and special settings on the Wireless GO II SINGLE. RØDE Connect is an amazing and very easy to use podcast/streaming software and also free.
Technical Specifications:
RADIO TRANSMISSION
Transmission: 2.4 GHz band
Range: up to 200 m (free line of sight)
SENDER
Internal microphone: miniature condenser capsule
Polar pattern: Omnidirectional
Limiting sound pressure level: 100 dB SPL (1 kHz @ 1 m)
Self-noise: 22 dBA
Frequency response internal microphone: 50 Hz - 20 KHz
External microphone input: 3.5 mm TRS (mono)
Max. Input level (3.5 mm jack): -20 dBV
Pre-amplification for external microphone: +20 dB
Power supply: built-in LiPo battery (up to 7 hours)
Charging: via USB-C jack
Dimensions (WxDxH): 45.3x44x18.3 mm
Weight: 30 g
RECEIVER
Level switch (pre-attenuation): 0 dB, -12 dB, -24 dB
Analog output: 3.5 mm TRS jack (two-channel)
Digital output: USB-C
System requirements Computer: Windows 10 or later or. Mac OS 10.11 or later
Power supply: LiPo battery (up to 7 hours) or USB
Charging: via USB-C jack
Dimensions (WxDxH): 45.5x44x18.3 mm
Weight: 32 g
Included in delivery:
1x Dual-channel Receiver
1x Transmitter
2x Fur windshield and
2x SC20 (USB-C cable)
1x SC5 (3.5mm TRS cable)
1x Neoprene carrying case
When creating your customer opinion and/or uploading media (e.g. images, videos, audio files, texts, documents, etc.), please observe our guidelines:
Each customer opinion is editorially checked before publication. Please ensure, among other things, that
By submitting your customer opinion and/or uploading media, you agree to these guidelines and terms of use.
These terms of use apply to the participation in and use of the customer ratings of Hifi Foto Koch GmbH. In the event of conflicts with the general terms and conditions or data protection regulations, these terms of use shall take precedence.
By submitting a customer rating and/or an upload of media (e.g. pictures, videos, audio files, texts, documents etc.) you assure that
You provide your content free of charge and are not entitled to any form of remuneration or compensation. There is no entitlement to publication.
Submitted customer opinions and uploaded media are usually reviewed and published within a few working days. All transferable rights of use of the content provided by you are transferred to Hifi Foto Koch GmbH and its current or future partners and representatives (including but not limited to affiliated companies, service providers, search engines, employees, agencies, branches, joint ventures, suppliers). The content may be used, modified and published by the aforementioned parties at their own discretion without any restrictions in terms of time, content and location. Promotional use is also permitted. The content may be edited or deleted if it violates the guidelines for ratings and community media as well as these terms of use or if it makes sense for the respective purpose. It is also possible to shorten the content at any time and without giving reasons.
Hifi Foto Koch GmbH and its current or future partners and agents do not warrant the ability to modify or delete the content you submit, should you wish to do so.
You transfer the rights and licence of your content to Hifi Foto Koch GmbH and its current or future partners and representatives. You grant Hifi Foto Koch GmbH and its current or future partners and representatives, the unrestricted right to your customer opinion (rating text, nickname, star rating, recommendation, etc.) as well as to your media (e.g. images, videos, audio files, texts, documents, etc.; incl. the indication of the author, description, etc.) to use, change, store, delete, shorten, modify, adapt, translate, copy, pass on, sell and distribute worldwide in any form, any medium, in any technology. Personal data (e-mail address, address, contact details) will not be passed on to third parties.
You assume full responsibility for your content. You agree to indemnify Hifi Foto Koch GmbH and its current or future affiliates and agents for all costs, including attorneys' fees, any damages, consequential damages of any kind, claims and demands arising from your failure to comply with the Review and Community Media Guidelines and these Terms of Use.
By submitting your customer opinion and/or uploading media, you agree to the Review and Community Media Guidelines and Terms of Use. By providing your email address, you agree that Hifi Foto Koch GmbH and its current or future partners and agents may send you status information of your customer opinion by email.
Data protection notice
When using the homepage including the submission of ratings and the upload of media, so-called personal data is processed by HiFi Foto Koch GmbH in the sense of Article 6 paragraph 1 DSGVO. Personal data is information that can be directly or indirectly assigned to you or can be assigned to you. In addition to the information entered by you, such as the name, e-mail and description, this data can also be data related to your customer account, IP addresses, access times, accessed URL, sources, browsers used, operating systems and devices, the name of your access provider as well as others. A full overview of data processing and privacy information can be found at https://www.fotokoch.it/privacy.html.